Total: $0.00
0 items
Call Us 1-866-558-3369

ProMelt 75 Sq Ft 240V Snow Melting Cable

Item Number: SC50240075

Manufacturer:

MFR Part No: 81011399

Alternate Part No: SC50240075

ProMelt Snow and Ice melting cables in 42 length options are a lower cost solution for Snow & Ice Melting than the easier to install ProMelt MATS. ProMelt Electric Radiant Heat cables SC50240075 for outdoor installation Heated Driveways, Heated Walkways and heated sidewalks are safer and can be automated for your convenience.

Quick Overview

ProMelt Snow and Ice melting cables in 42 length options are a lower cost solution for Snow & Ice Melting than the easier to install ProMelt MATS. ProMelt Electric Radiant Heat cables SC50240075 for outdoor installation Heated Driveways, Heated Walkways and heated sidewalks are safer and can be automated for your convenience.

Purchase

Guaranteed Low Price: $577.00

In stock

Recomended

Overview

ProMelt electric radiant snow melting cables are the most versatile and lowest cost option for snow melting installation any size, any shape - quickly providing electrically heated walkways and driveways. Cables are ideal for steps, curved or angled areas. Cables can be used for simple rectangular areas too, but mats install faster and easier in those situations.


Environmentally friendly snow and ice removal in the worst conditions is possible without using salt or hazardous chemicals. ProMelt provides energy efficiency and easy installation.

ProMelt heated snow melting cables are manufactured in the USA by SunTouch Watts Radiant (pioneers of indoor radiant heat). You choose your configuration and secure to rebar/mesh or using our Cable Strap on a base surface; maintaining proper and consistent spacing of cables is your job. Larger spacing means less heat but more coverage per cable.

Cables cost 10-15% less than mats and give you layout and heat output options since you control the spacing and determine the layout. Consider ProMelt Mats for a quicker and easier installation (the spacing is already done for you) for just a few dollars more. (See Specifications)

ProMelt is an effective, reliable and invisible snow melting system that will serve you for many years. Projects of 350 SF or less require cables and a snow sensor-controller and are very affordable and convenient.

ProMelt Snow Melting Benefits:

  1. ProMelt cables provide versatility and allow you to control the Watts per Sq Foot between 38 and 50.
  2. Automatically activates only when needed means your driveway and sidewalks stay clear and you never forget to turn the system off.
  3. No plowing or scraping means your walkway and driveway look better and last longer
  4. Maintenance Free permanent installation. Not like Hydronic systems (water) with pumps, boilers, etc
  5. Increase safety and reduce liability with ProMelt
  6. No hazardous chemicals to damage your landscaping or the environment
  7. No waiting for the plow or shovel to arrive - Dependable automatic snow sensor once moisture and temperature conditions are met activates ProMelt.
  8. Save Money - Eliminate snow removal labor costs
  9. The best construction using premium materials means ProMelt is built to last
  10. Increase the value of your home with an automatic ProMelt System
Product Details

ProMelt Cables provide the most flexible and low cost installation than any snow melting system in 3 easy steps once you have read all instructions, planned the electrical details, and prepared your jobsite:

  1. Determine cable spacing and layout we suggest using a spacer like a piece of wood
  2. Unwind cable(s) to fit any shape area and around obstacles or up steps
  3. Secure the cable onto the prepared base surface using CableStrap or cable ties to wire mesh/rebar

The ProMelt radiant heating cables are built tough for Permanent installation within virtually any surface to provide efficient melting of snow and ice automatically. They must be completely embedded and at least 1.25 inches below the top of the new layer.

  • New Concrete Surfaces install in top 2 inches secured to rebar or wire mesh on supports/chairs
  • New Asphalt on top of base layer. ProMelt's polyurethane outer insulation layer withstands 300 Degrees F
  • Pavers or brick set in compacted sand beds or in mortar
  • Stone or tile set in thickset mortar. Building Code requires all outdoor systems to be 1.25 inches below the top of the new surface
  • Not for use in gravel or dirt - must be embedded as described above
Warranty from Manufacturer10 year warranty backed by USA Manufacturer since 1873
Amp Draw15.6
Heating Wire constructionETFE Fluoropolymer, Braided copper ground plane, Foil shield and Outside polyurethane jacket
Heated Area75 SF (Sq. Ft. Square Feet)
Wattage : Total watts 3750 watts @ 3" inch spacing
Custom Size OptionsNone. Standard lengths only. No customization
Safety ListingETL Listed for U.S. and Canada under UL (Underwriters Laboratory) 515, IEEE 515.1, and CAN/USA C22.2 No. 130-03 : Listing file number: 3151992
Canadian Electric Code referenceSection 62 (CEC) Part I. Plus any local code requirements
Repairable Heating WireYes, Wire can be repaired. Repair kits and assistance available.
ColorOrange Heating Wire-Black power lead
Made In USAMade in USA
Installation
Instruction ManualPromelt SC50240075 75 Sq Ft 240V Snow Melting Cable Installation Manual
Skill Level : D-I-Y Simple for Install, PRO for ElectricInstallation only by qualified persons. Electrician recommended for wiring. Read More
Passes Impact Testing (CSA-130 impact rating)Yes. Exceeds the required rating
GFEP / GFCI Protection Required (Ground Fault Circuit Interrupter)Required for each circuit at the panel.
Maximum Circuit Load30 or 50 Amps @ 240v, depending on controls chosen
Maximum Circuit Overload Protection 70 A Breaker.
Recommended Insulation Resistance test by ElectricianUse a Megohmeter - see manual
Electrical Box Size (Where Mats connect to Thermostat)Suitable outdoor junction boxes as needed
Heating Elements (Dual Wire)Low Oxygen copper or nickel-copper
Full Length End-to-End ground wireYes. Braided copper ground plane
National Electric Code referenceANSI/NFPA 70 especially Article 426. Plus any local code requirements
Spacing of attachment to Mesh/Rebar or surfaceEvery 24" using cable ties (no metal)
Distance from Edges of Concrete/AsphaltMinimum 6" from edge of slab or 12" for asphalt without a curb
Minimum Depth1.50" inches below top of heated surface-completely covered : See Installation Manual
Recommended Method and Depth for Slab Use Chairs/dobies so rebar/Mesh ProMelt is attached to is in top 2" of slab - See Installation Manual.
Recommended Method and Depth for AsphaltAttach ProMelt over cooled asphalt base layer- Cover with hand shoveled final asphalt layer min 1.5 inch thick-DO NOT DRIVE machines on exposed ProMelt. Roll with small roller or compactor. - See Installation Manual
Recommended Method and Depth for Pavers in sandMinimum 1.5 inches sand over cables, max paver thickness of 2.50 inches - See Installation Manual
Recommended Method and Depth for Pavers in ConcreteMaximum 2.50" total thickness over cables - See Installation Manual
Recommended Method and Depth for Tile/Stone See Installation Manual and TCNA guidelines; 1.25 inch minimum
Suitable Installation Surfaces / Materials: Embedded in Concrete, Asphalt, Pavers in sand or concrete, Thickset mortar on slab. -See Installation Manual
Do Not Install in other surfacesNot in Dirt, gravel, walls, etc. ONLY approved installations
Maximum exposure temperature285°F (140°C) Short-term max. for asphalt covering
Minimum Installation Temperature40°F (4.5°C)
Installation Layout Map customized for my projectNo - example in manual. We provide Layout Maps only for MATS
Insulation RecommendedNo Insulation. Vehicular traffic can compress insulation causing problems.
Outdoor Installation OnlyOutdoor Snow Melting or Heating Application only.
Cut WarningNo. Never cut the heating elements to shorten
Specifications
Voltage240 VAC
How to choose 120 or 240 VoltSame Energy efficiency & same Watts/SF. More Sq Footage per circuit with 240v
Watts Per SF50 Watts per Sq Foot
Cable length in feet297' ft. feet
Cable length in inches3564" in. inch
Cable length in meters90 m meter metre
Heat Output BTUs per SF170 BTU per Sq Ft/Hour
Heating Power : Total BTU's12750 BTU total
ManufacturerSunTouch Watts Radiant
Brand NameSunTouch ProMelt
Power Lead TypeArmored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Power Lead Length20 Feet
Power Lead Wire Gauge (varies by heated area)18 AWG
Product Thickness1/4" in. inch
Heating Wire Spacing3" - 3.5" - 4" on center
Minimum Bend Radius1 inch
Weight7.0000
Ohms Reading (resistance value)11 - 15 ohms
ZERO* EMF (Electro Magnetic Field)Yes. Verified by Independent Testing Laboratory as ultra low.
Controls/Thermostat is required for operationAutomated Snow Sensing Controller recommeded for safety and lower energy use
PackagingEasy Open Cardboard - no frustration. Easy to dispense cable from spool
Width of heating area FeetVariable - you determine layout width, length, shape
Spacing between runs (inches) Heated SF Watts Per SF BTUs/SF/Hr
3 65 50 170
3.5 75 44 150
4 85 38 130
Reviews

Write Your Own Review

You're reviewing: ProMelt 75 Sq Ft 240V Snow Melting Cable

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Overall